Concrete look porcelain tiles have been designed and manufactured to have the texture of traditional concrete or cement flooring. However, these contemporary floor surfaces demonstrate an advanced level of convenience in terms of installation and maintenance.

Porcelain look tiles are very easy to maintain. Thanks to the high-quality materials, specifically finishes, used in the production! If you have these textured porcelain tiles installed in your house, follow the best practices explained in this blog to clean and maintain your floors and walls –

Remove all the dust off your floor/wall –

This is the first and foremost step to follow. If your concrete look porcelain tiles do not look good or have lost their shine, it may be because of long-staying dust and dirt over the surface.

Use vacuum cleaner to remove dust, debris, and dander from your tiled floor or walls. This is the fastest and least tiring way to make your room dust free. You could also use broom or dry mop for this purpose.

Ideally, you should repeat this exercise twice or thrice every week. However, if heavy foot traffic, this exercise should be carried out every day.

Mop the tile surface -

Mix 1 cup of white, clear vinegar in a tub filled with 1 gallon of warm water. Mop your concrete-look porcelain tiled surface with this mixture on alternate days.

Wash the surface -

To increase the effects of cleaning, you can also add liquid detergent in the aforementioned solution. And wash your walls and floors that have concrete look porcelain tiles installed. However, if you do so, you will need to be careful of the slippery while cleaning.

Before using the floor again, allow it dry completely after this exercise to avoid possible injuries caused by slippery.

Use baking soda paste to clean grout lines. However, with concrete look porcelain tiles, this is not usually the case.

Want to buy concrete look porcelain tiles? Check out MosaicsAndTile.com, one of the most trusted suppliers of stones and tiles in the US.